Product safety from the first drop to the last bottle.

Reliable disinfection for breweries and the beverage industry.

Water is the most important raw material in beverage production—and its consistent microbiological quality is the foundation of every high-quality product. The use of INNOWATECH ECA technology in the production and bottling of alcoholic and non-alcoholic beverages increases product safety, lowers water consumption, and significantly reduces the use of hazardous substances.

INNOWATECH Anolyte® is produced on-site on a just-in-time basis from water and table salt, with low levels of chlorite and chlorate.

Thanks to pure raw materials, a low active ingredient concentration of less than 1,500 ppm, and very short storage times, the formation of byproducts is reduced to an absolute minimum. This allows conventional, harsh disinfectants to be completely replaced.

Important: INNOWATECH Anolyte® is approved under the EU Biocidal Products Regulation as a disinfectant for use in the food industry and for drinking water disinfection. As the operator of an INNOWATECH system, you do not need your own approval.

Challenges

The daily challenges faced by breweries and beverage manufacturers.

Any microbiological contamination jeopardizes not only product quality but also the company’s reputation. At the same time, requirements are increasing: regulatory standards are becoming stricter, pressure to conserve resources is mounting, and conventional disinfectants carry their own risks—handling hazardous substances, corrosion, unwanted residues, and time-consuming documentation requirements.

INNOWATECH solutions address precisely these challenges: highly efficient, material-compatible, low in hazardous substances—and seamlessly integrable into existing production processes.

Applications

Applications in breweries and the beverage industry

INNOWATECH Anolyte® reliably prevents microbiological contamination—in all critical areas of production and bottling:

Drinking water and process water

Protecting the entire water supply system against bacterial contamination

Cooling water

Ongoing treatment in accordance with the 42nd BImSchV, biofilm control in cooling towers and pipes

Ice water

Reliable germ reduction in the ice water circuit

CIP systems

Cleaning and disinfection in one step

Rinser and bottle washer

Disinfection in the cold water zone

Bottling lines

Continuous disinfection via spray nozzles during the bottling process

Bottle shower

Integration into the continuous disinfection process

Services

What INNOWATECH Anolyte® offers breweries and the beverage industry

Disinfection during bottling

INNOWATECH Anolyte® is ideal for the continuous disinfection of microbiologically sensitive areas in PET, glass, can, and KEG bottling lines. Infeed and outfeed conveyors, transfer stars, filling valves, and cappers are continuously disinfected via special spray nozzles while the bottling process is in progress.

The result: a consistently high level of hygiene throughout the bottling process, significantly reduced biofilm buildup, and a substantially lower risk of microbial contamination in the beverage. At the same time, cleaning intervals are extended and cleaning time is reduced—a noticeable gain in bottling time, especially during periods of high capacity utilization or frequent bottle format changes. For sensitive beverages such as apple spritzer, the use of cold sterilants can be reduced or eliminated entirely.

Cooling water treatment & pasteur

INNOWATECH Anolyte® is used continuously in the cooling water system and in the tunnel pasteurizer at very low concentrations of 0.1–0.3 mg/l of free chlorine. The high stability of the active ingredient and its excellent effectiveness against biofilm formation set it apart from conventional biocides: Anolyte is not temperature-sensitive, poses no risk of corrosion, and does not pollute effluent or sewage treatment plants.

In the pasteur system, bacterial growth in cold- and hot-water zones is reliably prevented with an active ingredient concentration of just 0.05–0.2 mg/l of free chlorine. Since hypochlorous acid is generated directly as a liquid medium, the active chlorine cannot volatilize—it remains stable and effective at temperatures ranging from 0 °C to over 80 °C. Furthermore, the absence of biofilm noticeably improves heat transfer in heat exchangers.

The INNOWATECH Multi-Measurement Center (MMC) controls, monitors, and documents cooling water treatment—fully automatically and in compliance with 42. BImSchV.

Drinking water and process water treatment

Many breweries and mineral water companies use INNOWATECH Anolyte® to protect their drinking water—whether from their own wells or from the public water supply—against microbial contamination. Due to the active ingredient’s high stability and long-lasting effect, it can still be detected even at very low concentrations (< 0.3 mg/l—in compliance with the Drinking Water Ordinance) at the most remote points of highly branched distribution systems. This eliminates the need for additional dosing—and rules out the risk of chlorate accumulation.

Solutions

INNOWATECH Aquadron® – one system meets all disinfection needs.

A single INNOWATECH Aquadron® system supplies INNOWATECH Anolyte® for all disinfection applications in the plant—from drinking water and process water treatment to CIP systems and rinsers, all the way to the bottling line and pasteurizer. The active ingredient is produced on-site just-in-time from water and table salt—low in chlorite and chlorate, low in hazardous substances, and at minimal operating costs.

The control, monitoring, and documentation of cooling water treatment are carried out fully automatically via the INNOWATECH Multi-Measurement Center—in compliance with legal requirements and the provisions of the 42nd BImSchV.

Advantages

Benefits at a glance

Highly efficient against beverage pests

Bacteria, yeasts, viruses, fungi, mould, and biofilms

Compatible with materials

Ph-neutral, no risk of corrosion, no damage to system components

No product changes

At the recommended concentration, it does not affect the taste or quality of the beverage

Water, table salt, and electricity

Significant reduction in hazardous substances during operation; no complicated handling required

Lower water consumption

Longer cleaning intervals, shorter cleaning times

Legally compliant documentation

Automated monitoring and documentation via the INNOWATECH Multi-Measurement Center

No separate approval required

As the operator of an INNOWATECH system, you are fully covered

FAQ

Frequently asked questions about disinfection in breweries and the beverage industry

Yes. INNOWATECH Anolyte® is approved under the EU Biocidal Products Regulation (BPR 528/2012) as a disinfectant for use in the food industry and for drinking water disinfection. As the operator of an INNOWATECH system, you do not need your own approval.

No. At the concentration used, INNOWATECH Anolyte® does not alter your products—neither in taste nor in composition.

Highly effective. INNOWATECH Anolyte® quickly and reliably breaks down existing biofilms and prevents their regrowth—in pipes, bottling lines, pasteurizers, and cooling water systems. This results in a permanently lower bacterial count and improves heat transfer in heat exchangers.

Yes. INNOWATECH Anolyte® is suitable for continuous disinfection during the bottling process—via spray nozzles on infeed and outfeed conveyors, transfer stars, filling valves, and cappers.

Control, monitoring, and documentation are performed fully automatically via the INNOWATECH Multi-Measurement Center—in compliance with legal requirements and the provisions of the 42nd BImSchV.

No—at least not in significant quantities. By using pure raw materials, low concentrations of active ingredients, and very short storage times, the formation of chlorate and other byproducts is reduced to an absolute minimum.

Yes. INNOWATECH guarantees seamless integration into your existing systems—from the CIP system to the pasteurizer to the bottling line. We’ll work with you to develop the right hygiene concept for your facility.