INNOWATECH Anolyte®

Disinfection and germ reduction without hazardous substance classification.

Maximum disinfection effectiveness with minimal risks: INNOWATECH Anolyte® is a ph-neutral disinfectant produced using specially developed electrolysis cells with low chloride and chlorate levels—directly on site, from drinking water, table salt, and electricity.

The result is an active ingredient that is superior to conventional disinfectants in nearly every respect: highly efficient against bacteria, viruses, and fungi; gentle on materials; cost effective to produce; and completely free of hazardous substances.

Manufacturing

How INNOWATECH Anolyte® is produced

INNOWATECH Anolyte® is produced through membrane cell electrolysis in specially developed electrolysis cells. What makes it special: the process is carried out in the high, neutral ph range between 6.7 and 7.2—where the concentration of hypochlorous acid (hocl), the substance crucial for germ killing, exceeds 85%.

Unlike other ECA processes, this method produces virtually no elemental chlorine (cl₂)—the most reactive form of free chlorine, which is capable of chlorinating simple hydrocarbons, poses significant corrosion risks, and promotes the formation of AOX and THMs. By operating the process in the neutral ph range, this is precisely what is avoided.

Depending on the electrolysis cell used, the active ingredient concentration ranges from 200 to 900 ppm—less than 0.1 percent by weight. As a result, there are no hazards or stability issues. Even at high application concentrations of 5–15%, Anolyte is non-corrosive.

To continuously improve the quality of the active ingredient, INNOWATECH operates its own laboratory, where, among other things, the most important parameters of the Anolyte are analyzed using ion chromatography.

Applications

Where INNOWATECH Anolyte® is used

INNOWATECH Anolyte® is versatile—it can be used anywhere reliable disinfection and germ reduction are needed:

  • Drinking water treatment – continuous operation and pulse disinfection in the distribution network, pumping stations, and water treatment plants
  • Cooling and process water – microbial reduction and biofilm control in industrial circulating systems
  • Hot water systems – Legionella protection even at temperatures below 60 °C
  • Food and beverage industry – disinfection of surfaces, equipment, and process water
  • Surface disinfection – tanks, pipes, fittings, tools, and rooms
  • CIP purge – effective purge and disinfection in a single step

Legal considerations

Compliant with standards. Approved. Tested.

INNOWATECH Anolyte® and the electrolysis process used meet all relevant legal requirements:

  • Included in the list of treatment agents and disinfection methods pursuant to section 20 of the Drinking Water Regulation
  • Meets the purity requirements of DIN 901—regularly tested by independent laboratories
  • Compliant with DIN EN 17818 and DVGW worksheet W 229
  • INNOWATECH gmbh has been included in the article 95 list under the EU Biocidal Products Regulation (EU no. 528/2012) as an authorized active substance manufacturer
  • No labeling requirement under the hazardous substances regulation—not a substance hazardous to water

Advantages

Compelling advantages

Bactericidal, virucidal, and fungicide efficacy

Ph-neutral & gentle on materials

On-site production without the transport of hazardous materials

No aging issues

Low manufacturing and operating costs

Easy integration into existing systems

Reference projects

Reference projects that impress.

INNOWATECH technologies are used worldwide—in water treatment plants, industrial facilities, food processing plants, and many other applications. See for yourself: our reference projects demonstrate how our solutions work in practice.

Disinfection with Anolyte at a family-owned brewery

The INNOWATECH Aquadron® system replaces two chlorine dioxide systems and handles all disinfection needs at a family-owned brewery—across buildings and floors.

Disinfection via CIP in the brewery

An austrian family-owned brewery relies on the INNOWATECH Aquadron® GX to disinfect its CIP systems and ensure the safety of its process water. The system produces the active ingredient INNOWATECH Anolyte® directly on site and precisely doses it into the final rinse water from external tank cleaning as well as into the CIP processes.

Use of INNOWATECH Anolyte® in food processing

A food processing plant in rhineland-palatinate uses the INNOWATECH Aquadron® GXL to ensure the microbiological safety of drinking water, process water, and the piping systems throughout the entire facility.

INNOWATECH Anolyte® in a dairy

At an industrial facility in baden-württemberg, cooling towers and machine cooling circuits are treated with the electrochemically activated active ingredient INNOWATECH Anolyte®. The INNOWATECH Aquadron® CGK system produces the active agent directly on site, while the INNOWATECH Multi-Measurement Center continuously monitors the relevant parameters.

Hot-water disinfection at the rehabilitation center

At a rehabilitation center in baden-württemberg, Legionella contamination in the hot water systems of several buildings was effectively eliminated using INNOWATECH Anolyte®. Five INNOWATECH Aquadron® systems produce the active ingredient on-site and dispense it into the respective hot water systems. Five INNOWATECH Multi-Measurement Centers continuously monitor and document the drinking water treatment.

Chlorination during transport at the water treatment plant

A municipal water utility in baden-württemberg relies on INNOWATECH Anolyte® for transport chlorination and water treatment. The INNOWATECH Aquadron® ECO system produces the active ingredient on-site using salt, water, and electricity.

Cooling water disinfection in cooling towers and machine circuits

At an industrial facility in baden-württemberg, cooling towers and machine cooling circuits are treated with the electrochemically activated active ingredient INNOWATECH Anolyte®. The INNOWATECH Aquadron® CGK system produces the active agent directly on site, while the INNOWATECH Multi-Measurement Center continuously monitors the relevant parameters.

FAQ

Frequently asked questions about INNOWATECH Anolyte®

INNOWATECH Anolyte® is a ph-neutral disinfectant based on hypochlorous acid (hocl). With an hocl concentration of over 85%, it is highly efficient against bacteria, viruses, and fungicides—about 10 times more potent than chlorine dioxide.

Anolyte is produced on-site in the INNOWATECH Aquadron® system via membrane cell electrolysis using drinking water and table salt. The process is carried out within a neutral ph range—without hazardous substances and without the need for external chemical supplies.

No. By operating the process within a neutral ph range, the formation of elemental chlorine, THMs, AOX, chlorate, and perchlorate is virtually eliminated. Chlorite levels remain consistently below the limit of detection.

No. Unlike conventional disinfectants, Anolyte is non-corrosive even at high application concentrations of 5–15% and does not damage elastomers. It is compatible with all common plumbing materials.

Yes. The active ingredient and process are listed in accordance with section 20 of the german drinking water ordinance (TrinkwV) and comply with DIN EN 17818 and DVGW worksheet W 229. INNOWATECH is also included in the article 95 list under the EU Biocidal Products Regulation as an authorized active ingredient manufacturer.

Because there is no need to transport hazardous substances, no need for secure storage, and no need for complex handling of hazardous chemicals. In addition, age-related accumulation of chlorate or perchlorate—as occurs with commercially available chlorine bleach solutions—is reliably prevented.

Contact

Questions? We’re happy to help!

    *Required

    We process your data in accordance with our Privacy Policy.

    Other ways to contact us

    Alte Kaserne 28
    72186 Empfingen